Text Size

Search Site

Ultrasonics

RMS Ultrasonics Analysis Services: Multi-frequency sonic/ultrasonic analysis can be used to monitor grease,

 the Achilles’ heel of lubricant condition monitoring. Although grease analysis is practical from a testing point of view, it is impractical from a sampling point of view. Considering the numbers of machines that are grease lubricated, this problem, “How to do condition monitoring on grease?” is a serious one that needs to be addressed.

Maintenance professionals often report the biggest problems with their tribology program are over-greasing, under-greasing, wrong grease, and sometimes no grease at all.   Over-greasing causes high temperatures and results in shedding of oil from grease. Under-greasing causes inadequate lubricant delivery. The wrong grease in a bearing also has the same effect. It doesn’t properly deliver oil to the loaded rollers. All these result in lubricant-starved bearings. These problems (over-greasing, under-greasing, wrong grease, and no grease at all) cause increased energy loss due to friction. This energy shows up as mechanical energy (ultrasonic) and thermal energy (heat).

Downloads

Refresh
Documents for this section are:

Contact Details

enquiries +44(0)1206791917 Fax: +44(0)1206791917 This e-mail address is being protected from spambots. You need JavaScript enabled to view it Office Hours 8:30 to 5pm Mon-Fri

Quick Email enquiry


CSI 2130 Analyser

csi2130

The CSI 2130 stands alone as the industry-leading vibration data collector, but its capabilities also include: Advanced Vibration Analysis Cross-Channel Analysis Transient Analysis Dynamic Balancing Laser Shaft Alignment Motor Monitoring

 

 

CSI 9420 Wireless VA


CSI 9420 Wireless Vibration Transmitter – Providing Accurate Vibration Monitoring in Hard-To-Reach Locations

 

 

CSI 5200 Oil Lab

The CSI 5200 Machinery Health Oil Analyzer tests oil for machine wear, lube system contamination, and chemistry changes of the oil that are indicative of machinery health degradation.