Entries by Stuart Walker

Treatment for Machine Vibration Problems

Machine vibration problems reviewed When looking at machine vibrations it is always necessary to be able to distinguish between normal operations and emerging problems. Vibration can be symptomatic of a problem, or it can be the cause of a problem. There are times when the machine isn’t physically vibrating and there is a problem. In […]

Motion Amplification Webinar | Questions Answered

Motion Amplification Webinar Implementing an Industry 4.0 Maintenance Technology 30 September 2020: 10:30am – 11.45am GMT Maintec (Nineteen Group) Reliability Maintenance Solutions Ltd Organisers: Jos Diamond, Verity Noon and Maggie Law Host: Keith Gallant (Reliability Consultant and Technology Manager at RMS Ltd) Speakers: Stuart Walker (Director of RMS Ltd), Jeff Hay (CEO of RDI Technologies) […]

,

Case Study: Flue Gas Recycle Fan

Flue Gas Recycle Fan: Introduction The Flue Gas Recycle Fan is part of the COGA unit. The fan increases the efficiency of the COGA unit by recycling a proportion of the incinerated gases from the COGA stack. The fan is critical in sustaining high rates of operation on the plant, catastrophic failure of this fan […]

,

Arlanxeo wins BEMAS Asset Performance Award

Arlanxeo Performance Elastomers, Belgium, win a BEMAS Asset Performance Award; from all at RMS Reliability, many congratulations on this well-deserved achievement. In the category ‘Best Improvement in Maintenance & Asset Management’, Christophe Van de Maele and Kristof Van Den Berghe of Arlanxeo were allowed to take the trophy home. The four case examples in which […]