iLearnReliability Enterprise Edition

Table of Contents hide

1. Who should subscribe

2. Learning highlights

3. Study information

4. Study options

5. Expert advice and setup

6. Resources

7. FAQs

Who should subscribe

The iLearnReliability Enterprise Edition enables you to achieve your goals because it helps you create the reliability culture throughout the organization and it provides the strategy and education to make the required changes.

The Enterprise Edition focuses on reliability improvement and condition monitoring can do for an industrial facility. Reduction in costs, improvements in availability, and reduction in safety and environment incidents all contribute to the financial viability of the organization and the well being of employees and shareholders.

But achieving these goals has proven difficult for most organizations. Some hire consultants, only to find the plant returns to the bad old days soon after they leave. Some try training a select few to become experts in the subject, but that approach struggles because there is no plant-wide-buy-in, and people believe reliability improvement is the responsibility of the reliability group alone. That is the wrong approach. Reliability is everyone’s approach. Some try a ‘home-grown’ approach of external courses and internally developed e-learning. And there have been other attempts, from classical RCM to Lean, Sixth Sigma, TM, and others. It’s not to say that those approaches don’t make an improvement, but they often don’t result in a sustainable improvement

iLearnReliability Enterprise takes a different approach. It provides training to everyone, from the most senior management to the plant-floor workforce. Everyone learns now they contribute to the reliability improvement initiative.

Learning highlights

Independent training, free from sales literature
Annual LMS subscription, 1-50 licences
Ongoing topic assessment. No formal examination
Professional support getting the LMS setup
Learn about Reliability strategies; review of CM technologies
Subscribe online or complete a PDF registration form
Professional Training Brochure for offline reading
Support available via email, chatbot or telephone

Study information

Key learning

Learn about strategy, leadership and culture change
Develop your own ‘Roadmap to Reliability’ to ensure improvement success
Understand Reliability issues like: Criticality, Defects, RCM, FMEA, PMO, RCA and ODR
Improve knowledge of the different Maintenance practices
Explore how CM technologies play a vital part in reliability
Use precision skills to understand alignment and balancing, soft foot, lubrication and contamination control

Course description

iLearnReliability Enterprise covers the topics that your team will need to master in order to understand asset management, leadership, the strategy of plant reliability improvement and the individual building blocks required for a successful implementation.

How it works

When you purchase the iLearnReliability Enterprise Edition we will create a Web-based learning management system just for your organization. We will customize the Web address in the form https://companyname.ilearnreliability.com, all of the training modules are available on that site.

We will provide a person from your company with access to the administration functions of the site. This will enable you to create accounts for other people. We hare made this task because we created 30 common profiles: engineers, condition monitoring technicians, plant-floor craftspeople, and more. You simply create an account and assign them to one of these profiles and they will have access to the appropriate training modules.

But you have total control. You provide people with a little bit of training at a time. You can decide to give people more or fewer training modules. And you can decide who should take quizzes and who should not.

And you can track the progress. You can see who has been assigned to what, and you can see who has completed their training. And you can see how they did in the quizzes.

The only limitation is the number of users. We offer subscription packages and if you buy a license for 20 users, then you cannot create 21 user accounts.

When you create an account for a person they are sent an e-mail with a link. They simply click, log-in, and click to learn.

Video: Introduction to iLearnReliability Professional Development

What does it look like?

Course topics

Strategy, Leadership And Culture Change

Roadmap to Reliability | Leadership and executive sponsorship | Benchmarking and KPIs | Developing a reliability culture | Change management

Reliability Improvement

Maintenance

Maintenance practices | Master Asset List | Preventive maintenance | Condition Based Maintenance

Condition Monitoring

Precision Skills

Shaft alignment | Soft foot | Balancing | Lubrication | Contamination control

Examinations

Study options

Self-paced

Once students are assigned a seat the learning can begin
Students complete the LMS content at their own pace
The HR function can support student efforts via the LMS
L&D can integrate iLearn with existing LMS platforms

Technology requirements

Internet connected individual computer. The platform does not require any software download.

Questions?

Expert advice and setup

Dean Whittle is as an approved trainer for both the British Institute of Non-Destructive Testing (BINDT) and Mobius Institute ISO-18436-2 accreditation programmes.

James Sylvester is as an approved trainer for both the British Institute of Non-Destructive Testing (BINDT) and Mobius Institute ISO-18436-2 accreditation programmes.

Resources

More about Online Learning

What can I study online?

We are pleased to offer the following online training courses and learning solutions that include community-based digital support and personal instructor mentoring. You can learn at your own pace, with assistance from an instructor, and optionally take the exam at the end of the course.

Vibration Analysis: CAT-I, CAT-II, CAT-III and CAT-IV
Asset Reliability Practitioner (ARP): Advocate, Engineer and Leader
iLearnReliability CM
iLearnReliability Professional
iLearnReliability Enterprise

Distance learning benefits

If the high cost of travel and accommodation, and the time away from your family and work has stopped you from receiving the training that you need, then you should consider our distance learning courses.

At a time that is convenient to you, and at a pace that works best for you, you can take our lessons and learn in a very similar way to attendees of our classroom courses. Depending upon the course, you can either view fully narrated slides, or you can watch a video of the class in action.

Narrated slides

Utilizing the popular iLearnVibration and iLearnAlignment products, we offer distance learning courses where you can view the lessons at your own page, in your own time, and get assistance from an instructor when any questions arise. Of course, you can just buy the products and learn at your own pace without assistance, but you are sure to benefit from interaction with the instructor. In certain courses, you can also interact with other students.

Video lessons

These are not noisy, unprofessional videos taken from actual classrooms, each video was carefully created and edited so that you receive the full benefit. As you can see in this sample, you see the instructor talking and you see the slides (and simulators) being used in high resolution. All you need is a good Internet connection and a good monitor (1024×768 or better) and you will be ready to start learning. You can pause and rewind the video so that you can see and hear the instructor cover the topic again.

In addition to the lessons, hands-on videos are presented where a variety of vibration analyzers are used to perform a range of tests. The tests include demonstrations of averaging (linear, rms, and peak hold), bump tests, run up and coast down tests, simple ODS tests, bearing fault detection tests, phase analysis, live spectrum analysis, time waveform analysis, and more.

You can also perform activities defined by the instructor, and take quizzes that will be reviewed by the instructor.

This is a great way to learn. The convenience of learning from home, and the reduced costs associated with travel, meals and accommodation make this a very attractive option – especially while the world’s economy is still recovering.

Terms and Conditions

Updated (28/04/2023)

THE REGISTRATION FORM MUST BE COMPLETED AND RETURNED TO CONFIRM A PLACE ON THE COURSE.
A VALID EMAIL ADDRESS MUST BE SUPPLIED FOR EACH CANDIDATE.
BOOKINGS ARE TAKEN ON A FIRST COME, FIRST SERVED BASIS AND MUST BE RECEIVED PRIOR TO ATTENDING THE COURSE.
IF YOU ARE AN EXISTING CUSTOMER THEN A VALID PURCHASE ORDER MUST ACCOMPANY THE REGISTRATION FORM. PLEASE ADD THE PO NUMBER TO THE REGISTRATION FORM AND SEND THE PO TO [email protected].
IF YOU ARE A NEW CUSTOMER THEN PAYMENT WILL NEED TO BE MADE ON RECEIPT OF THE INVOICE.
FOR CREDIT CARD PAYMENTS, ADD YOUR CARD DETAILS TO THE REGISTRATION FORM, OR IF YOU PREFER, CALL THE ACCOUNTS DEPARTMENT ON +44 (0)1206 791917. IN ACCORDANCE WITH UK LAW, THERE ARE NO PROCESSING FEES FOR USING PERSONAL CREDIT OR DEBIT CARDS. IF YOU ARE PAYING WITH A COMMERCIAL CREDIT OR DEBIT CARD THE PROCESSING FEE IS CURRENTLY 2.5%. AS OF MAY 2ND, 2023, ANY COMPLETE OR PARTIAL REFUNDS ISSUED WILL BE SUBJECT TO A DEDUCTION OF 2.5% FOR THE CARD PROCESSING FEES INCURRED.
ANY CANCELLATIONS WOULD NEED TO BE RECEIVED AT LEAST FOUR WEEKS BEFORE THE START OF THE COURSE, (SO WE HAVE ENOUGH TIME TO OFFER THE PLACE TO SOMEONE ELSE) OTHERWISE A CANCELLATION FEE OF HALF THE COURSE COSTS WOULD BE PAYABLE. CANCELLATIONS NEED TO BE CONFIRMED IN WRITING OR BY EMAIL.
NOTIFICATION OF A CHANGE OF CANDIDATE OR CHANGE OF COURSE WOULD NEED TO BE RECEIVED AT LEAST TWO WEEKS BEFORE THE START OF THE COURSE. AN ADMIN FEE OF £ 100.00 PER CANDIDATE WILL BE CHARGED. ANY CHANGES NEED TO BE NOTIFIED TO US IN WRITING OR BY EMAIL.
IF A CANDIDATE DOES NOT ATTEND THE COURSE AND WE HAVE NOT BEEN NOTIFIED IN ADVANCE OR WE ARE GIVEN LESS THAN 1 WEEKS NOTICE THEN THE FULL COURSE FEE WOULD BE PAYABLE.
STUDENTS ATTENDING HOTEL-BASED COURSES ARE RESPONSIBLE FOR BOOKING THEIR ACCOMODATION AND ALL HOTEL COSTS.

Languages

We would assume that as the course and exam are delivered in English, your level of spoken and written English is sufficient for you to be able to attend the course and take the exam. If English is not your first language we can apply for extra time in advance of the course. Please notify us as soon as possible if there is any other reason why you need extra time in the exam (eg. Dyslexia), so we can see if we can arrange extra time for you in the exam. The exam body will need to be contacted to arrange this.

Pricing & VAT

Prices listed are exclusive of UK VAT, currently at 20%. This applies to all training courses conducted in the UK. Please contact the Training team on +44 (0)1206 791917 if you have any queries.

Training Coordinator

Wendy Whittle
[email protected]

General enquiries

Training Team
[email protected]

COVID-19 Liability Waiver

“I understand that by placing a booking this release discharges RMS Reliability Training Institute from any liability”

I acknowledge the contagious nature of the Coronavirus/COVID-19 and that the CDC and many other public health authorities still recommend practicing social distancing.

I further acknowledge that the RMS Reliability Training Institute has put in place preventative measures to reduce the spread of the Coronavirus/COVID-19.

I further acknowledge that RMS Reliability Training Institute can not guarantee that I will not become infected with the Coronavirus/Covid-19. I understand that the risk of becoming exposed to and/or infected by the Coronavirus/COVID-19 may result from the actions, omissions, or negligence of myself and others, including, but not limited to, training staff, and other training clients and their families.

I voluntarily seek services provided by RMS Reliability Training Institute and acknowledge that I am increasing my risk to exposure to the Coronavirus/COVID-19. I acknowledge that I must comply with all set procedures to reduce the spread while attending my training course.

I attest that:

I am not experiencing any symptom of illness such as cough, shortness of breath or difficulty breathing, fever, chills, repeated shaking with chills, muscle pain, headache, sore throat, or new loss of taste or smell.
I have not traveled internationally within the last 14 days.
I have not traveled to a highly impacted area outside the UK in the last 14 days.
I do not believe I have been exposed to someone with a suspected and/or confirmed case of the Coronavirus/COVID-19.
I have not been diagnosed with Coronavirus/Covid-19 and not yet cleared as non contagious by state or local public health authorities.
I am following all UK Government recommended guidelines as much as possible and limiting my exposure to the Coronavirus/COVID-19.

I hereby release and agree to hold RMS Reliability Training Institute harmless from, and waive on behalf of myself, my heirs, and any personal representatives any and all causes of action, claims, demands, damages, costs, expenses and compensation for damage or loss to myself and/or property that may be caused by any act, or failure to act of the company, or that may otherwise arise in any way in connection with any services received from RMS Reliability Training Institute.

I understand that by ‘placing a booking’ this release discharges RMS Reliability Training Institute from any liability or claim that I, my heirs, or any personal representatives may have against the company with respect to any bodily injury, illness, death, medical treatment, or property damage that may arise from, or in connection to, any services received from RMS Reliability Training Institute. This liability waiver and release extends to all owners, partners, and employees.

FAQs

Is iLearnReliability Enterprise an annual subscription?

Yes, iLearnReliability Enterprise is an All-In-One subscription based training system that teaches your team everything needed to become champions at CM & Reliability, and will provide the necessary guidance to setup or revitalize your plant’s CM & reliability program.

Can I talk with a Training Specialist?

Yes, we are happy to arrange a call. Please use the Chatbot to schedule a call, or email the team with suggested dates.

How much does the subscription cost?

To receive a custom quotation complete the short form above. The training team strives to provide quotations within one working day.

Last updated: 10th June 2023