Posts


PeakVue Plus – Bearing Friction

In this the third of three videos on PeakVue, James Sylvester shows that when the Emerson AMS 2140 is setup correctly, PeakVue Plus can detect issues with lubrication health, in this case, the bearing friction was off the scale! The asset in question is a critical plant fan on a variable speed drive with an operational speed of 1200rpm with 22224 EK Taper roller bearings installed.

Incorrect grease used

This short presentation shows how PeakVue Plus detected incorrect grease used by the contractor prior to any considerable bearing damage occurring. As part of the site maintenance annual shutdown the bearing caps were opened, the grease removed and it repacked with fresh grease. Watch as James explains how the PeakVue Plus technology helped confirm the root cause, (6 mins):
Read more


PeakVue Introduction – Part II

In this the second of three videos on PeakVue, James Sylvester shows that when the Emerson AMS 2140 is setup correctly, PeakVue can pick up sub surface Hertzian cracks. In this example, James refers to a 110KW Motor on a variable speed drive for a plant critical pump.

Outer Race Defect Identified

On an asset assessment survey of a critical plant, a sub surface defect on a motor bearing was identified; this was very early detection and allowed time to plan in the bearing replacement as to not disrupt the production schedule. Watch James explain in layman’s terms how the PeakVue technology works and what sets it apart from the others (6 mins).
Read more